astMaterial
Floor layer colon BOPP
Glue layer colon EVA adhesive
astSpecification
Gloss
SPECIFICATION | 18mic | 21mic | 24mic | 24mic | 27mic | 30mic | |||
GLOSS | GLOSS | GLOSS | GLOSS | GLOSS | GLOSS | ||||
THICKNESS lparmic rpar | Base | twelve | twelve | twelve | 15 | fifteen | 18 | ||
ADHESIVE | 6 | 9 | 12 | nine | twelve | 12 | |||
Complete | 18 | 21 | 24 | 24 | 27 | thirty | |||
WEIGEPT | m2 solkg | 60 period4 | fifty one period6 | forty five period045 | 45 period45 | 40 period11 | 36 period15 | ||
kg solm2 | period01656 | period01938 | period5712 | period571 | period57193 | period57166 | |||
WIDTH lparmm rpar | 300mm-1800mm | ||||||||
Duration lparm rpar | 200m-3000m | ||||||||
PARER Core | 25mm lpar1inch rpar comma58mm lpar2 period25inches rpar comma76mm lpar3inches rpar | ||||||||
BONDING | Less THAN two | ||||||||
Matt
SPECIFICATION | 24mic | 27mic | 30mic | |||
MATT | MATT | MATT | ||||
THICKNESS lparmic rpar | Base | 15 | 15 | 18 | ||
ADHESIVE | nine | 12 | twelve | |||
Overall | 24 | 27 | 30 | |||
WEIGEPT | m2 solkg | forty six period3 | 41 | 37 | ||
kg solm2 | period5716 | period5714 | period5711 | |||
WIDTH lparmm rpar | 300mm-1800mm | |||||
Duration lparm rpar | 200m-3000m | |||||
PARER Main | 25mm lpar1inch rpar comma58mm lpar2 period25inches rpar comma76mm lpar3inches rpar | |||||
BONDING | Significantly less THAN 2 | |||||
astprocess parameter colon
normal | EPT | |
Temperature | 85 ~ a hundred ordmC | a hundred ~ 110 ordmC |
Roll Pressure | 8 ~ 15Mpa | 16 ~ 25 Mpa |
Speed | five ~ thirty M solmin | 5 ~ten M solmin |
Lamination Products | dry and soaked laminator | |
Remarks | Special laminations refer to these with thick ink comma dim coloration comma significantly humidity and big size paper |
astdirections for employing BOPP thermal laminating movie colon
Standard approach temperature is 90c-105c comma roller pressure and temperature range with different kinds of paper comma ink and EPTs period of time
When using the film for the initial time or do other treatment comma attempt a little volume prior to mass laminating time period
Make positive the ink is dry before laminating time period It will delaminate when the paper contains also considerably moisture and powder period of time
Make sure set the materials in a lower-temperature comma dry spot period
astEPT colon
StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd export bundle with carton pluspallet interval