Fast Dry Sublimation Coating Powder for Fabric Printing

Fast Dry Sublimation Coating Powder for Fabric Printing

Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis especially developed and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic fabric transfer printing, to prevent the overlap of the pattern, deformation and other concerns of elastic fabric in the approach of transfer, resulting in a extremely low pass price of transfer printing.
1 For the duration of the transferring, the sticky coating powEPTcould be able to stick the fabric and paper, but there is no glue residue on the cloth after stripping
2 The stickiness of the material and paper can be adjusted by the maker of the transfer paper unEPTthe guidance of our company and the viscosity is more steady, which can be stored for a EPT time.

Substantial Concentration Sublimation Coating Powder
For the existing higher-speed coating EPTs, our business independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a sound material of far more than 30% of the coating chemical – large concentration coating powder. On the basis of no escalating in charges, the coating velocity could be considerably enhanced, and generation ability will be doubled than the quick-dry coating powders.

For high-velocity coating EPT production, coating manufacturer ought to have a experienced coating technological innovation.

Quick-dry Sublimation Coating Powder
The formulation of the very first generation of EPT sublimation transfer paper coating is commonly utilised in the market place, but progressively it can’t be matched with the prerequisite of higher-velocity printer thanks to the higher price, minimal production performance and sluggish drying of printing coating.
Nano-induced secondary self-assembly methods of this coating substance, are significantly enhanced in the adhering to factors:

one The general cost of this quick-dry mixed powEPTis lowered whilst the usability of the powEPTremains unchanged

2 This rapidly-working day coating powEPTcan enhance the efficiency of coating creation, and the creation pace can be promoted by much more than 25%.

3 Due to useful improvement, the printing drying charge of this merchandise has been improved much more than one time, and it can savelarge sum of electrical EPT from the baking lamp.

How to use our coating powEPT:

  1. Introducing proportional drinking water into stirring tank, maintain drinking water temperature as same as place temperature.
  2. Put EPT bag coating powEPTslowly into agitator although stirring, and keep stirring until the chemical powEPTdissolving uniformly into water, no lump on the surface of liquid. The dissolution time is dependent on the technique of agitator.
  3. EPTking some samples of undertaking checks soon after dissolving, and take notes of glue temperature and corresponding viscosity, ensure the certified screening end result just before filtration.
  4. Two occasions of filtration prior to coating on EPT with 800-100mesh filter
  5. The liquid glue continue to be on EPT is recyclable while coating. It must be through filter display once again and can be utilised in miXiHu (West Lake) with clean liquid coating substances.

JoinGoal EPT Material(HangZhou) Co., LTD

TEL :86~thirteen 0571 88828 138581177787 62890542
FAX: 86~571-8822571/8822 0571 -67913566
Site: http://en.sign up

Fast Dry Sublimation Coating Powder for Fabric Printing

Fast Dry Sublimation Coating Powder for Fabric Printing