EPT is a thermal secure insulating material in the welding-rod coatings EPT and also employed in caulking compounds, lubricants, greases, dry-powEPTfire extinguishers, as a slim coating on rubber surfaces to conquer tackiness and sticking, In exterior home paints decreases working and sagging, and increases weatherability. The addition of mica to all kinds of sealers for porous surfaces (this sort of as wallboard, masonry, and concrete blocks) greatly decreases penetration and enhances holdout. The inclusion of mica in road and freeway paints increases wearability, offers good adhesion, and reduces flaking and cracking, also employed to coat wallpaper due to the fact it imparts an appealing silky or pearly luster, used predominantly in paint, plastics and rubber.
We supply muscovite, phlogopite, sericite, biotite and mica powder(dry mica powEPTand moist mica powder).
Chemical composition | SiO2 | Al2O3 | K2O | Fe2O3 | CaO | Na2O | MgO | H2O |
Contents(%) | 47.32 | 33.25 | 11.82 | one.81 | .03 | .96 | .91 | 2.seven |
Muscovite
Chemical factors
Physical properties:
Density (g/m3) | Refractive index | Whiteness (%) | Moisture (%) | Radius-thickness ratio | Warmth Resistance ( deg C) | L.O.I. (%) |
2.80 | one.sixty | 70-eighty | lt1% | gt60 | 1300 | 2.82-2.nine |
Phlogopite
Chemical components:
Elements | SiO2 | Al2O3 | MgO | K2O | H2O |
Contents% | 36-forty five | 10-17 | 19-27 | 7-10 | lt1 |
Bodily qualities:
Density(g/cm3) | Transparency (%) | Mosshardness | Whiteness | Refractive index | Coefficient of elasticity (ten 6Pa) |
two.7-2.nine | -25.5 | two.78-2.85 | 60-70 | 1.6-one.fifty five | 1394.five-1874 |
Sericite
chemical components:
Components | SiO2 | Al2O3 | K2O+Na2O | H2O |
Contents% | 43.13~forty nine.04 | 27.93~37.forty four | nine~eleven | 4.13~six.twelve |
Biotite
chemical elements:
Elements | SiO2 | Al2O3 | K2O | MgO | Na2O | S | P | Burn up |
Contents% | 45.02 | 10.forty six | 10.18 | sixteen.88 | .46 | 2.43 | .34 | one.ninety three |
mica powder
Wet mica powEPTphysical and chemical indicators:
Dimension | Screen margin (%) | Sand Content material (%) | Bulk density (g/cm3) | H2o articles (%) | Loss on Ignition (%) | Whiteness | Radius-thickness ratio |
125um (one hundred twenty mesh) | 250um lt0.one 125um | lt3. | le1. | le0.3 | le1. | le4.3 | gt70 |
90um (one hundred sixty mesh) | 180um lt .190um | lt5. | le1. | le0.25 | |||
75um (200 mesh) | 150um lt .1 75um | lt5. | le0.6 | le0.23 | |||
45um (325mesh) | 112um lt .145um | lt5. | le0.5 | ||||
38um (400mesh) | 75um lt .1 38um | lt5. | le0.five |
Dry mica powEPTphysical and chemical indicators:
Measurement | Screen margin (%) | Fe contents 1X10 quot |
Sand Content (%) | Bulk density (g/cm3) | Drinking water articles (%) | Whiteness | Radius-thickness ratio |
900um (twenty mesh) | le0.5 | le400 | le0.five | le3. |
le1. |
gt60 |
gt60 |
450um(40 mesh) | le0.five | le400 | le1. | le3. | |||
300um(60 mesh) | le0.5 | le800 | le1. | le3. | |||
150um(100mesh) | le0.five | le800 | le1. | le0.25 | |||
75um (200mesh) | le1. | le800 | le1. | le0.25 | |||
45um(325mesh) | le2. | le400 | le1. | le0.22 | |||
35um(400mesh) | le5. | le400 | le0.five | le0.22 | |||
28um(500mesh) | le5. | le300 | le0.5 | le0.22 | |||
23um(600mesh) | le5. | le300 | le0.5 | le0.22 | |||
18um(800mesh) | le10. | le300 | le0.5 | le0.22 | |||
13um(1000mesh) | le10. | le300 | le0.5 | le0.22 |
Grain Measurement Distribution:
Measurement | +twenty | +forty | +sixty | +one hundred | +200 | +325 | -325 | Sand Content | Iron Content |
% | PPM | ||||||||
twenty mesh | 5 | 70 plusmn5 | twenty five plusmn5 | le10 | le5 | le0.5 | le100 | ||
forty mesh | le1 | 55 plusmn5 | forty plusmn5 | le10 | le1 | le400 | |||
sixty mesh | le0.01 | le1 | 45 plusmn5 | 45 plusmn5 | le15 | le1.5 | le800 | ||
a hundred mesh | le0.01 | le1 | 35 plusmn5 | 35 plusmn5 | le35 | le1.5 | le1000 |
Purposes:
one. It can be used in cosmetic business.
two. It is prior filler in paint and coating.
3. It is used in defending layer of welding rods, conducting wires and electric cables.
4. It is the basic raw material for mica porcelain products.
five. It can be utilised as suspended compound in fire-preventing dry powder.
6. It can be taken as filler, shelter, lubricating substance, a drawing of patterns in plastics, rubber, asbestos goods and sealing materials.
seven. It can also be used as filler in insulating supplies of large-frequent electrical waves and acid-resilient goods.
8. It can be utilized as coating in versions of forecasting steel, the brightening content in aluminum and paint in electroplating.