BOPP Thermal Film with EVA Glue-21mic Gloss

BOPP Thermal Film with EVA Glue-21mic Gloss

*Materials

Floor layer: BOPP
Glue layer: EVA adhesive

*Specification

Thickness: 21mic
Width: 300~1800mm
Duration: two hundred~3000m
Paper core: twenty five.4mm (one inch), 58mm(two.25inches), 76mm(three inches)
Bonding: Less than two

*procedure parameter:

Products for thermal film: Dry and wet movie laminator
Lamination temperature: 95~105c
Roller pressure: ten-20mpa
Velocity: eight-20 m/min

*instructions for employing BOPP thermal laminating film:

Regular procedure temperature is 90c-105c, roller pressure and temperature vary with distinct types of paper, ink and EPTs.
When making use of the film for the initial time or do other treatment, try a little quantity just before mass laminating.
Make sure the ink is dry prior to laminating. It will delaminate when the paper contains too significantly humidity and powder.
Make positive put the material in a lower-temperature, dry spot.

*EPT:

BOPP Thermal Film with EVA Glue-21mic Gloss

BOPP Thermal Film with EVA Glue-21mic Gloss